Now there are many fields are using electric lift freight elevator, in the use of the process of which there are many considerations need to be understood. So what are the correct operating steps of electric lift freight elevator?

　　One of the construction elevator installation and dismantling of this work, need to go through professional training, which requires the operation of professionals to operate and maintain the certificate to do. After the installation of electric lift freight elevator, the need for installation and commissioning, which concerns his quality and accuracy, etc., this is very important. In particular, the need to install the prescribed procedures or relevant technology for testing, after passing the test, the need for visas and so on, so as to put into operation.

　　However, before putting into use, the electric elevator needs to go through the fall test, three months need to do a fall test, in the process of fall test needs to be adjusted, in the process of falling need braking distance can not exceed 1.2m, where each fall needs to be reset on the safety device, of course, also need to adjust the safety device, or the corresponding overhaul, these are required manufacturers or These are required to be carried out by the manufacturer or the approved unit, especially the fall protection test requires professional personnel to operate.

　　Elevator operators in the process of operation need to strictly comply with the safety operating procedures, so as to pay attention to the relevant matters, especially in the operation before the need to focus on the routine inspection or maintenance work, the most important is the need to hold a special work permit on the job.

　　However, it is strictly prohibited to use the formation of limit switches or to stop the operation of the control switch, these details are very important, which in the event of high winds or icing to immediately stop running, pull the gate to cut off the power.